Seal Strength Testing
2015-07-27 17:55:46

     The efficacy of heat seals is often detailed in governing specifications, contracts, and regulations. Quality management systems sometimes ask for periodic subjective evaluations: For example, some seals can be evaluated by a simple pull to determine the existence of a bond and the mechanism of failure. With some plastic films, observation can be enhanced by using polarized light which highlights the birefringence of the heat seal. Some seals for sensitive products require thorough verification and validation protocols that use quantitative testing. Test methods might include:

  Seal Strength per ASTM F88 and F2824
  Seal Strength testing, also known as Peel Testing, measures the strength of seals within flexible barrier materials. This measurement can then be used to determine consistency within the seal, as well as evaluation of the opening force of the package system. Seal strength is a quantitative measure for use in process validation, process control and capability. Seal strength is not only relevant to opening force and package integrity, but to measuring the packaging processes' ability to produce consistent seals.
  Burst and Creep per ASTM F1140 and F2054
  The burst test is used to determine the packages strength and precession. The burst test is performed by pressurizing the package until it bursts. The results for the burst test include the burst pressure data and a description of where the seal failure occurred. This test method covers the burst test as defined in ASTM F1140.The Creeptest determines the packages ability to hold pressure for an extended period. The creep test is performed by setting the pressure at about 80% of the minimum burst pressure of a previous burst test. The time to seal failure or a pre-set time is measured.
  Vacuum Dye per ASTM D3078
  Determination of package integrity. The package is submerged in a transparent container filled with a mixture of water and dye. Vacuum is created inside the container and maintained for a specific length of time. When the vacuum is released, any punctured packages will draw in dye revealing the imperfect seal.
  Edited by Better package Co., Ltd
  www.fduvu.com/en/
pc蛋蛋网址 湖北快3投注平台 pc蛋蛋导航 江苏快3平台 pc蛋蛋官方网址 pc蛋蛋官方网址 pc蛋蛋网 河北快3 广西快3 广西快三